Filter
traxxas
Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
TraxxasConnector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)
TraxxasConnector, power tap (with voltage sensor plug)/ wire tie/ 2.6x8 BCS (2)
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
TraxxasConnector, wiring harness (EZ-Start® and EZ-Start® 2)
Control box (complete) (EZ-Start® 2)
TraxxasControl box (complete) (EZ-Start® 2)
COOLING FAN (3483 MOTOR)
TraxxasCooling fan kit (with shroud)/ 2.5x16mm CS (with threadlock) (4) (fits #3483 motor) Lower your Velineon motor’s temperatures with this cooling fan ...
View full detailsCOOLING FAN DUAL 1200XL MOTOR
TraxxasDual cooling fan kit, low profile (with shroud) (fits #3491 motor)/ 3x16 CS (8)
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
TraxxasCooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
Cooling fan kit (with shroud), Velineon® 540XL motor
TraxxasCooling fan kit (with shroud), Velineon® 540XL motor
Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)
TraxxasCooling fan, Velineon® VXL ESC (fits VXL-4s, VXL-6s & VXL-8s)
Cooling fan, Velineon® VXL-3s ESC
TraxxasCooling fan, electronic speed control, Velineon® VXL-3s or BL-2s™
Copy of Black Extreme Heavy-Duty Front Shock Tower
TraxxasCopy of DSHAFT STEEL CV FRONT OR REAR
TraxxasCopy of Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5)
TraxxasCoupler, exhaust (silicone)
TraxxasCoupler, exhaust (siliconee)
COVER PLATES/SEALS REVO FRWRD
TraxxasCover plates and seals, forward only conversion (Revo®) (Optidrive® blank-out plate, Optidrive® sensor cover, shift fork cover) These seals cover a...
View full detailsCover, center driveshaft (clear)
TraxxasCover, center driveshaft (clear)
Cover, gear (clear)
TraxxasCover, gear (clear)
Cover, gear/ motor wire hold-down clip
TraxxasCover, gear/ motor wire hold-down clip
Cover, gear/ rubber gear cover plug/ 3x6 RM (2)
TraxxasCover, gear/ rubber gear cover plug/ 3x6 RM (2)
Cover, gear/ wire retainer
TraxxasCover, gear/ wire retainer
Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 motors)
TraxxasCover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 mot...
View full detailsCovers, gear (2)
TraxxasCovers, gear (2)
Covers, gear (3)
TraxxasCovers, Gear (3)
Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
TraxxasCross pin (2)/ drive pin (2) (repairs 1 axle shaft)
Cush drive key/ pin/ elastomer damper
TraxxasCush drive key/ pin/ elastomer damper
Cush drive key/ pin/ elastomer damper
TraxxasCush drive key/ pin/ elastomer damper
Control box battery cover w/ belt clip (EZ-Start 2)
TraxxasControl box battery cover with belt clip (EZ Start 2)
Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)
TraxxasCooling head, PowerTune (machined aluminum, blue- anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5)
Copy of Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS (2)
TraxxasCover plate, steering servo/ 3x8 BCS (4)
TraxxasCover plate, steering servo/ 3x8mm BCS (4)
Cover plate, Traxxas Link Wireless Module
TraxxasCover plate, Traxxas® Link Bluetooth® module
Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4)
TraxxasCover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4)
Cover, Center Driveshaft (clear)
TraxxasCover, center driveshaft (clear)
Cover, center driveshaft (clear)
TraxxasCover, center driveshaft (clear)
COVER, DIFFERENTIAL
TraxxasCover, differential
Cover, gear/ 3x12mm CS (1)
TraxxasCover, gear/ 3x12mm CS (1)
COVER, GEAR/ 3X8MM CS (1)
TraxxasCover, gear/ 3x8mm CS (1)
Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)
TraxxasCover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1)
TraxxasCover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1)
Crankcase, w/o bearings (TRX 2.5)
TraxxasCrankshaft, IPS (for engines w/ starter) (TRX 2.5, 2.5R)
TraxxasCrankshaft, IPS (for engines w/o starter) (TRX 3.3)
TraxxasCrankshaft, IPS (for engines w/starter) (TRX 3.3)
TraxxasCrankshaft, IPS (for engines w/starter) (TRX® 3.3)
Crankshaft, long (fits Nitro Hawk/ Buggy/ Street)
TraxxasCrankshaft, multi-shaft (for engines w/o starter) (TRX 3.3)
TraxxasCrankshaft, multi-shaft, (for engines w/o starter) (TRX® 3.3)
Crankshaft, multi-shaft (for engines w/starter) (TRX 3.3)
TraxxasCrankshaft, multi-shaft, (for engines w/starter) (TRX® 3.3)
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
TraxxasCross pin (2)/ drive pin (2) (to rebuild front axle shafts)
Cross pin (4)/ drive pin (4)/ set screw (4) (to rebuild 2 driveshafts)
TraxxasCross pin (4)/ drive pin (4)/ set screw (4) (to rebuild 2 driveshafts)