Stampede 2WD Brushless Black
by TRAXXAS
Sold out
Original price
$329.95
-
Original price
$329.95
Original price
$329.95
$329.95
$329.95
-
$329.95
Current price
$329.95
- 35+ mph with 2s LiPo. 50+ mph with 3s LiPo (no gearing change required)
- NEW Clipless Monster Truck Body with Bash-Locks™
- Clipless latches hold tight and release in seconds
- NEW Bash-Locks secure the clipless latches firmly into place for extreme bashing
- Injection-molded grille and tailgate body reinforcements
- Superior body protection for extreme bashing
- NEW Monocoque Chassis Design
- Shock towers are integrated into the chassis
- Reinforced crossbar supports
- Double-shear shock mounts
- Longer and wider footprint
- Increases handling and high-speed stability
- Ultra-tough front and rear bulkheads and skid plates
- Integrate seamlessly into the chassis
- Reinforced front bumper and fixed wheelie bar
- Large aluminum heat sink with cooling fan
- Three programmable drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode™ - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set® one-button setup
- Telemetry capable with optional accessories
- High-Resolution Linear Braking
- Compatible with 2s and 3s LiPo batteries (NiMH not supported)
- NEW Velineon V3200 Brushless Motor (patent pending design)
- Ultra high-temperature sintered Neodymium magnets provide massive torque and linear power
- 3200 Kv optimized for power and efficiency in 1/10th scale vehicles
- 5 mm output shaft
- Internal cooling fan for longer run times
- Low-maintenance design
- Efficient, high-speed ball bearings
- TQi™ 2.4 GHz 2-Channel Radio System
- High-output signal delivers outstanding range
- Multi-function knob
- 30-model memory
- 3-channel micro receiver with fail-safe security
- Watertight receiver box with O-ring sealed cover
- NEW Punch Control™
- Dials in the perfect launch for any surface
- Adjusts the amount of throttle applied relative to trigger pull
- Adjusts from 0-100% using transmitter's Multi-Function knob
- Traxxas Stability Management® (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on power slides
- Never dulls throttle or slows the truck
- NEW Double-Wishbone Suspension Design
- Maintains proper suspension geometry
- Allows huge suspension travel
- Double-shear connections
- Extreme HD suspension components and arms
- Beefed-up with extra material for superior strength
- NEW Battery Tray Design
- Battery is protected deep in the chassis
- Rugged battery strap latches shut to secure batteries
- No battery clips to lose
- Accepts many 2s and 3s battery configurations
- Steering
- NEW 2057 waterproof, metal-gear servo
- Full metal gear train for improved durability
- NEW dual-bellcrank design with integrated servo saver
- Transmission and Driveline
- Magnum 272™ metal-gear transmission
- Torque-Control™ slipper clutch system
- NEW 32-pitch spur and pinion gear
- NEW heavy-duty top shaft
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- NEW XX-long Composite GTR Shocks
- Threaded shock collars for precise ride height adjustment
- Large oil capacity for consistent damping
- White powder-coated springs
- Spring retainers captured with a screw
- 3.5 mm shaft
- Wheels and Tires
- Large 2.8″ black monster truck wheels
- Removable center caps
- Same wheel offset front and rear
- NEW Talon MXT Tires
- Tall monster truck profile
- Angled tread pattern for massive forward bite
- Precision Hex Hardware
- Rubber-Sealed Ball Bearings
MODEL SPECS
| Name: | Stampede 2WD Brushless |
|---|---|
| Type: | Monster Truck |
| Speed: | 35+ mph with 2s LiPo battery, 50+ mph with 3s |
| Skill Level: | 1 |
| Scale: | 1/10 |
| Weight: | 6.09 pounds (2.76 kg) |
| Length: | 20.28 inches (515 mm) |
| Width: | 13.86 inches (352 mm) |
| Track: | 13.86 inches (352 mm) |
| Height: | 8.34 inches (212 mm) |
MOTOR SPECS
| Name: | Velineon V3200 (patent pending) |
|---|---|
| Motor Type: | Sensorless brushless |
| Weight: | 7.48 ounces (212 g) |
| Length: | 3.15 inches (80 mm) |
| Diameter: | 1.53 inches (39 mm) |
| Shaft Size: | 5 mm |
| Connector Type: | 3.5 mm Bullet |
ESC SPECS
| Name: | VX3 Electronic Speed Control |
|---|---|
| ESC Type: | Brushless |
| Voltage Range: | 2-cell or 3-cell LiPo (NiMH not supported) |
| Case Size: | 2.40″ (61 mm) x 2.09″ (53 mm) x 1.69″ (43 mm) |
| Weight: | 4.20 ounces (119 g) |
| BEC Voltage: | 6.0 volts |
| Motor Connectors: | 3.5 mm Bullet |
| Battery Connectors: | Traxxas High-Current Connector |
MODEL 136454-4: Stampede® 2WD Brushless: 1/10 scale monster truck, fully-assembled, waterproof, Ready-To-Race®, with TQi™ 2.4 GHz 2-channel radio system with Punch Control, Velineon® 3s brushless power system, and clipless painted body. Requires: battery and charger.
What’s In The Box:
- Stampede 2WD monster truck with VX3 ESC and V3200 motor
- TQi 2.4 GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries
Stampede 2WD Brushless requires a single 2-cell or 3-cell LiPo battery (NiMH not supported)
- Charger
The Traxxas EZ-Peak® charger 2970 is recommended for easy and fast charging performance.
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.