Adhesives

Screw Pin, 4x18mm (with threadlock) (6)

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to h...

Team Losi Racing - TLR76009The TLR Lok Threadlock Blue by Team Losi Racing is a quality built accessory.

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are Bob Smith Industries' odorless foam safe CAs. They are non-frosting and take onl...

Features:Clear formulaTough, permanent bondExcellent gap filling shock resistantSpecifications:Set time: 15 minutes

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency tha...

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are Bob Smith Industries' odorless foam safe CAs. They are non-frosting and take onl...

Insta-Flex+™ clear rubber toughened has similar qualities to Bob Smith Industries' black IC-2000™ but can be used in applications where you do not ...

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve t...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

Extra CA Over Cap Replacement colored cap that fits over the #312 top.

Insta-Cure+™ is a medium viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

Screw pin, 3x11mm (with threadlock) (6)

Motor coupler, collet style/ GS 4x3 SS (with threadlock) (1)/ wrench, 10mm (2)

Drive dog/ 4x3mm GS (stainless, with threadlock) (1)

Shoulder screws 3x10 (6) (without threadlock)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Screw pins, 4x13mm (with threadlock) (4)

Body washers, foam adhesive (10)

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure...

Screws, set (grub) 4mm (6) (with threadlock)

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in ...

Mini-Z Tire Tape, Wide (9mm)

Pocket CA Extender Tip - #304 For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. W...

IC-LOC™ Blue is a medium thickness, medium strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC™ Blue ...

Our HD Curved Steel Glue Tips are better than ever featuring new heavy duty plastic made to fit a wider array of glue bottles! The curved steel ti...

Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x11 screw pin (1)/ cross pin (black) (...

Double-sided adhesive, sound output module (4)

Chassis, 6061-T6 aluminum (3mm) (anodized blue)/ adhesive foam pad (1)

Box, battery (gray)/ adhesive foam chassis pad/charge jack plug (rubber)

Screws, 4x6mm button-head machine (hex drive) (with threadlock) (6)

Pocket CA Extender Tip - #304 For use with BSI's Pocket CAs. It slips over the tip of the Pocket CA top to allow for finer application of the CA. W...

Box, receiver/ x-tal access rubber plug/ adhesive foam chassis pad