All Products

Electronics box, right/ box cover/ charge jack plug (rubber)/ foam padding and adhesive

Team Losi Racing - TLR76009The TLR Lok Threadlock Blue by Team Losi Racing is a quality built accessory.

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to h...

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are Bob Smith Industries' odorless foam safe CAs. They are non-frosting and take onl...

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure...

Plastic-Cure™ is a gap-filling formulation of CA that works best on plastics. It is packaged in a bottle with a brush built into its top, which in ...

This is a 0.75 ounce bottle of ProTek R/C CA Tire Glue in Medium thickness. ProTek R/C CA Glue is a high performance clear cyanoacrylate with a med...

Features:Clear formulaTough, permanent bondExcellent gap filling shock resistantSpecifications:Set time: 15 minutes

Drive dog/ 4x3mm GS (stainless, with threadlock) (1)

FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency tha...

Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When use...

Motor coupler, collet style/ GS 4x3 SS (with threadlock) (1)/ wrench, 10mm (2)

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonde...

Box, receiver & battery (2)/ cover/ foam pad & adhesive/ charge jack plug (rubber)/ 4x8mm BCS (1)/ 4x12mm BCS (2) (contains both boxes to a...

Insta-Cure+™ is a medium viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one s...

Screw Pin, 4x18mm (with threadlock) (6)

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve t...

Extra CA Over Cap Replacement colored cap that fits over the #312 top.

Screw pin, 3x11mm (with threadlock) (6)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Screw pins, 4x13mm (with threadlock) (4)

Body washers, foam adhesive (10)

Shoulder screws 3x10 (6) (without threadlock)

Screws, set (grub) 4mm (6) (with threadlock)

Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and ...