Filter
All Products
Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks
TRAXXASRebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
TRAXXASSpur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
Body clip (mounting clip), angled, 90-degrees (10)
TRAXXASBody clip (mounting clip), angled, 90-degrees (10)
Velineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC, Velineon 3500 motor, and speed control mounting plate (part #3725R))
TRAXXASVelineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC , Velineon® 3500 motor, and speed control mounting plate (part ...
View full detailsWHEELS WHEELIE BAR W/ AXLE
TraxxasWheels (4)/ mounting screws (2) (for standard wheelie bar)
Carburetor, complete (minus air filter assy) (TRX® 2.5, 2.5R composite slide)
TRAXXASCarburetor, complete (minus air filter assy.) (TRX® 2.5, 2.5R, 3.3 composite slide)
Body mounts, front & rear/3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)
TRAXXASBody mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)
Motor, 2200Kv 75mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink)
TRAXXASMotor, 2200Kv 75mm, Brushless (with 6.5mm Gold-plated Connectors and High-efficiency Heatsink)
SHOCK TOWER REAR
TRAXXASMOTOR MOUNTS BLUE ALUM FOR 3483
TRAXXASChassis, low CG (gray)
TRAXXASChassis, low CG (gray)
Official Team Traxxas® racing decal set (flag logo/ 6-color)
TRAXXASOfficial Team Traxxas® racing decal set (flag logo/ 6-color)
SHOCK CAP ALUM GTX GRN
TRAXXASShock caps, aluminum (green-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)
Gear set, differential (front) (output gears (2)/ spider gears (4))
TraxxasGear set, differential (front) (output gears (2)/ spider gears (4))
Ball bearings, blue rubber sealed (5x10x4mm) (2)
TraxxasBall bearings, blue rubber sealed (5x10x4mm) (2)
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)
TRAXXASSuspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)
Ball bearings, black rubber sealed (5x10x4mm) (2)
TRAXXASBall bearings, black rubber sealed (5x10x4mm) (2)
Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)
TRAXXASSpur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)
Axle shaft, front (left)/ drive pin/ cross pin
TRAXXASAxle shaft, front (left)/ drive pin/ cross pin
AXLE FRONT ASSEMBLED
TRAXXASAxle, front (assembled)/ M2.5x0.45 NL (2)
XRT SERVO HORN STEERNG/LINKAGE 48MM
TRAXXASServo horn, steering/ linkage, steering (48mm, assembled with pivot balls)
Gearbox halves (l&r) (gray) w/ idler gear shaft
TRAXXASGearbox halves (L&R) (grey) with idler gear shaft
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)
TRAXXASGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)
Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)
TRAXXASEngine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10), ELW 3x6.5x.45 (3)
Shaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
TRAXXASShaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
Lower chassis, low CG (black)
TRAXXASLower chassis, low CG (black)
Wheel washers, blue (4)
TRAXXASWheel washers, blue (4)
Nimh 6-Ce Battery pack 16 E-Revo,1/16 Slash 4X4, 1/16 Summit, 1/18 LaTrax Desert1/18 LaTrax Rally, 1/18 LaTrax Teton
TRAXXASBattery, Series 1 Power Cell iD®, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)
Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Bulkhead, rear (upper and lower)
TRAXXASBulkhead, rear (upper and lower)
Suspension pin retainer (4)
TRAXXASSuspension pin retainer (4)
Motor, Titan 380 (18-turns)
TRAXXASMotor, Titan® 380 (18-turns)
Body mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware
TRAXXASBody mount, front & rear (black)/ body posts, 52mm (2), 38mm (2), 25mm (2), 6.5mm (2)/ body post extensions (4)/ hardware
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Camber link set for Bandit (gray) (plastic/ non-adjustable)
TRAXXASCamber link set for Bandit® (gray) (plastic/ non-adjustable)
Covers, gear (2)
TraxxasCovers, gear (2)