Filter
All Products
Push rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
Sway bar arms, rear (satin-plated)
TRAXXASSway Bar Arms, Rear, (satin-plated)
Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Rod ends, short (6)/ hollow balls (6)
TRAXXASRod Ends, short (6)/ hollow balls (6)
Suspension arms, front (left), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (left), heavy duty (upper (1)/ lower (1))
Gear, 21-T pinion (48-pitch) / set screw
TRAXXASGear, 21-T pinion (48-pitch) / set screw
Skid plate, roof (body)/ 3x12mm CS (4)
TRAXXASSkid plate, roof (body)/ 3x12mm CS (4)
Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)
TraxxasServo mount, steering (for use with TRX-4® Long Arm Lift Kit)
SERVO SAVER ASSEMBLED
TRAXXASServo saver/ servo saver spring/ servo horn, steering (assembled)
DRIVESHAFTS CENTER ASSM (F&R)
TRAXXASDriveshafts, center, assembled (front & rear)
Linkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)
TRAXXASLinkage, sway bar, front (2) (assembled with hollow balls)/ sway bar arm (left & right)
TRAXXAS BODY LATE MODEL CLR W/PLASTIC
TRAXXASStampede 4X4 BL-2s: 1/10 Scale 4WD Monster Truck Green
TRAXXASGreen Stampede 4X4®: 1/10-scale 4WD Monster Truck. Ready-To-Race® with TQ 2.4GHz Radio System and BL-2s™ brushless ESC (fwd/rev)
MAXX WITH WIDEMAXX Blue
TRAXXASBlue Maxx®: 1/10 Scale 4WD Brushless Electric Monster Truck. Fully assembled, Ready-to-Race®, with TQi™ Traxxas Link™ Enabled 2.4GHz Radio System w...
View full detailsWHEEL HUB X-MAXX ALUMINUM ORNG
TRAXXASWheel Hubs, Hex, Aluminum (orange-Anodized) (4)
SUSP ARM LOWR LFT WIDEMAXX RED
TRAXXASSuspension arm, lower, red (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
XRT Caster blocks (c-hubs), left & right
TRAXXASCaster Blocks (c-hubs), Left and Right
Bulkhead (front) (black)
TRAXXASBulkhead (front) (black)
Gear, locking differential output/ differential slider/ 3x12mm screwpin
TRAXXASGear, locking differential output/ differential slider/ 3x12mm screwpin
Body, Jato® 3.3, ProGraphix® (replacement for the painted body) Graphics are painted, requires paint & final color application.
TraxxasBody, Jato® 3.3, ProGraphix® (replacement for the painted body) Graphics are painted, requires paint & final color application.)
Skid plates, front & rear (green)
TRAXXASSkid plates, front & rear (green)
SUSPENSION ARMS BLACK REAR
TRAXXASSuspension arms, black, rear (left & right), heavy duty, 1° toe angle (2)
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
TRAXXASUltra Shocks (black) (xx-long) (complete with spring pre-load spacers & springs) (rear) (2)
UPPER CHASSIS GRAY
TRAXXASSteering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)
TRAXXASSteering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)
Shock tower, front
TRAXXASShock tower, front
Caster spacers (4)/ shims (4)
TRAXXASCaster spacers (4)/ shims (4)
FUEL CANISTERS / JACK
TRAXXASFuel canisters (left & right)/ jack (red) (fits #9712 body)
Body accessories kit, 2017 Ford Raptor® (includes grille, hood insert, side mirrors, & mounting hardware)
TRAXXASBody accessories kit, 2017 Ford Raptor® (includes grille, hood insert, side mirrors, & mounting hardware)
Suspension arm, lower right/ arm insert (assembled with hollow ball)
TRAXXASSuspension arm, lower right/ arm insert (assembled with hollow ball)
Nuts, 5mm flanged nylon locking (steel, serrated) (8)
TRAXXASNuts, 5mm flanged nylon locking (steel, serrated) (8)
E-clips/ C-rings
TRAXXASE-clips/ C-rings
Mounts, suspension arms, aluminum (blue-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6)
TRAXXASMounts, suspension arms, aluminum (blue-anodized) (front & rear)/ hinge pin retainers (12)/ inserts (6)
Toe links, front (TUBES red-anodized, 6061-T6 aluminum) (2) (for use with #8995 WideMaxx™ suspension kit)
TRAXXASToe links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #8995 WideMaxx® suspension kit)
BODY MAXX PAINTED RNR
TRAXXASBody, Maxx®, Rock n' Roll (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)