All Products

Skidplate, chassis, graphite gray (fits Sledge®)

Suspension arm covers, blue, rear (left and right)/ 2.5x8 CCS (12)

Stub axles, hardened steel (2) (for steel constant-velocity driveshafts) (fits Sledge®)

Suspension arm, front (left), blue

O-rings (6)

Servo mount, steering/ servo horn

Toe links, Sledge™ (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ alu...

Screws, 3x18mm cap-head machine (hex drive) (6)

Suspension link set, steel (includes 4x53mm front lower links (2), 4x46mm front upper links (2), 4x68mm rear lower or upper links (4))

Bumper, front/ bumper mount/ 4x12 CCS (4)/ 4x22 BCS (2)/ 3x10 BCS (2) (fits 2WD Bigfoot® No. 1) (for LED light kit installation)

LED Light Set (contains Headlights and Roof Lights) (fits #8823 Body)

High-Output Off-Road Light Kit for SledgeSledge® was built to a new level of precision and toughness to create a unique driving experience. The new...

Shock tower, rear, 6061-T6 aluminum (blue-anodized)

Carriers, stub axle (rear) (left & right) These left and right rear stub axle carriers were redesigned and beefed-up for XRT®. Standard in XRT,...

Wheels, 1.0" (black) (2)

Bumper, front (1)/ rear (1)

Frame, body (fender flares) (fits #9712 body)

ExoCage/ roof basket (top, bottom, & sides (left & right)) (fits #9712 body)

Frame, body (fender flares)/ spare tire mount (fits #9711 body)

Suspension arms, upper, red (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Steering Blocks, Left and Right/ Steering Block Arms (aluminum, Dark titanium-Anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

Wire harness (for use with #3475 cooling fan)

Steering blocks, left & right/ steering block arms (aluminum, blue-anodized) (2)/ 3x18mm CS (2)/ M3x0.5mm NL (2)

Suspension arm covers, green, front (left and right)/ 2.5x8 CCS (12)

Suspension arm, rear (right), green

Body reinforcement set, green/ skid pads (roof) (fits #9511 body)

Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)

Suspension arm, front (right), blue

Suspension arm, rear (right), blue

Differential, center, complete (fits Sledge®)

Driveshaft, steel constant-velocity (assembled), front (1)

Stub axle, front

Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware

Camber links, rear (144mm) (2) (assembled with hollow balls)

Carriers, stub axle (left and right)

Body mount, rear/ shock guard (body retainer), front

Stub axle, rear (for use only with #9557 rear driveshaft)

Retainer, battery hold-down (front and rear) (1 each)

Gear, 12-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)

Sway bar kit, Sledge® (front and rear) (includes front and rear sway bars and linkage)

Drag Race Start LightNo-Prep Race Starts Made EasyNo-prep drag racing is even more fun and exciting with the new Traxxas Drag Race Start Light. The...

Suspension arms, upper, orange (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Body, Factory Five '33 Hot Rod Coupe (clear, Requires Painting)/ Foam Pads (front and Rear)/ Decal Sheet (includes Front Grille, Side Mirrors, Head...

Plate, Motor, Lightweight machined 6061-T6 Aluminum (blue-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)