All Products

Spring, shock (red) (GTR) (0.314 rate) (1 pair)

Axle shafts, front, outer (2)

Grille/ mirrors, side (left & right)/ spare tire cover/ light retainers, body (front & rear, left & right)/ decal sheet (fits #9712 body)

Spur gear, 55-tooth

Cush drive key/ pin/ elastomer damper

Plate, motor, 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)

Wheels, Weld black chrome (front) (2)

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)

Wheelie bar, black chrome (assembled)/ wheelie bar mount

Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Data Link, Telemetry Expander (connects #6550X Telemetry Expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, Or #3496 Velineon® VXL...

Bumper, front/ skidplate, front (black)

Sensor, auto-detectable, temperature

Drag link, machined 6061-T6 aluminum (orange-anodized)

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)

Ball bearings, blue rubber sealed (5x8x2.5mm) (2)

MAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)

Stub axle carriers (2)

Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Bulkhead, front

Suspension arms, long (rear)

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

Receiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease

Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)

Suspension arms, rear (left & right)

Ball bearings, black rubber sealed (5x8x2.5mm) (2)

Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)

Spring, shock (GTR) (0.82 rate, triple orange) (1 pair)

Pivot balls (4)/ pivot ball caps (4)

Spur gear, 54-tooth (1.0 metric pitch)

Mount, steering arm/ steering stops (2) (lower hinge pin retainer) (includes standard and maximum throw steering stops)

Driveshaft, center, plastic (black)/ screw pin

Axle carriers, left & right (2 each)

Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))

Suspension pin set, complete (front and rear)

Screws, 3x20mm button-head machine (hex drive) (6)

PTFE-coated washers (5x11x.5mm) (use with self-lubricating bushings)

Mount, telemetry expander (requires #6730 chassis brace kit)

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)