All Products

Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Bulkhead, front

Suspension arms, long (rear)

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

Receiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease

Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)

Suspension arms, rear (left & right)

Ball bearings, black rubber sealed (5x8x2.5mm) (2)

Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

Spring, shock (GTR) (0.82 rate, triple orange) (1 pair)

Pivot balls (4)/ pivot ball caps (4)

Spur gear, 54-tooth (1.0 metric pitch)

Mount, steering arm/ steering stops (2) (lower hinge pin retainer) (includes standard and maximum throw steering stops)

Driveshaft, center, plastic (black)/ screw pin

Axle carriers, left & right (2 each)

Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))

Suspension pin set, complete (front and rear)

Screws, 3x20mm button-head machine (hex drive) (6)

Mount, telemetry expander (requires #6730 chassis brace kit)

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4)

Rod ends, heavy duty (toe links) (8) (assembled with hollow balls)

Housing, differential (front)

Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Screw pin set (Rustler®, Bandit®, Stampede®)

Stub Axle, Aluminum (Black-Anodized) (1) (for Use Only with #7750X Or 7896 Driveshaft)

Suspension arm, orange, lower (right, front or rear),®heavy duty (1)

Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Plate, motor, green

Spring, shock (GTR) (1.92 rate, green) (1 pair)

Body, GTR shock (molded composite) (2)

Skid plate, roof (body) (red)/ 3x12mm CS (4)

Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)

Spring, shock (red) (GTR) (2.3 rate double purple stripe) (1 pair)

Spring, shock (red) (GTR) (2.0 rate double black stripe) (1 pair)

Ring gear, differential/ pinion gear, differential