All Products

Body support/ 3x12mm CS (4)

Main shaft (2)/ 1.6x5mm BCS (2)

Motor, counter-clockwise (high output, black connector) (1)

Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Distribution block, Pro Scale® Advanced Lighting Control System

Power Module, Pro Scale® Advanced Lighting Control System (includes Mount, Communication Cables, Hardware)

Sensor, temperature and voltage (short)

Stuffing tube (assembled with liner)

Stuffing tube (assembled with liner)

Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm BCS (stainless, with threadlock) (1)

Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential)

Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)

Propeller shaft/ flex cable

Spring, shock (red) (long) (GTR) (5.4 rate double orange stripe) (1 pair)

Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Ball bearing, black rubber sealed (20x27x4mm) (2)

Springs, red (for Big Bore shocks) (2.5 rate) (2)

Pull ring (2), fuel tank cap (1)/ engine shut-off clamp (1)

Brake pad set (inner and outer calipers with bonded friction material)

Rocker arm set, long travel (120-T) (use with #5318 or #5318X pushrod)

Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Multi-tool (plastic)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Spring, shock (red) (GTR) (6.4 rate purple) (1 pair)

Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)

Spring, shock (red) (GTR) (1.4 rate double pink stripe)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Servo saver spring, heavy duty (for use with metal-gear servos)

Screw pins, 4x13mm (with threadlock) (4)

Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3)

Bulkhead tie bars, front & rear (red-anodized aluminum)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Suspension arm upper (1)/ suspension arm lower (1) (left front))

Screw pin, 4x15mm (6)

Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)