Filter
All Products
Wheel washers, blue (4)
TRAXXASWheel washers, blue (4)
Bulkhead, rear (upper and lower)
TRAXXASBulkhead, rear (upper and lower)
Maintenance Kit 1, Composite Shocks, 1 Set
Team CorallyMaintenance Kit 1, Composite Shocks, 1 Set for Syncro 4 & Kagama 4
CEN Two Way Adjustable Aluminum Tow Hitch
CENKAOS Two way Adjustable Tow Hitch, for CEN Racing F250 or F450
DuBro Bulk Dura-Collars,1/16" (12)
Dubro ProductsHigh quality machined brass shaft collars that are great for wire landing gear and axle shafts. Enough stock so that threads will not strip and ca...
View full detailsGens Ace G-Tech Smart 3S LiHV Battery 60C (11.4V/3600mAh) w/Universal Connector
GENS ACEGens ace 3S Smart LiPo Battery with Universal G-Tech Balance Connector The batteries are equipped with a universal G-Tech balance connector, fea...
View full detailsREDCAT GOLD CHROME PARTS TRANSMISSION CASE W/ GEAR COVER
REDCATSUSPENSION PINS HARDEND 4X85MM
TRAXXASSuspension pins, 4x85mm (hardened steel) (2)
Vanquish Products H10 Optic Straight Rear Axle Set
VANQUISH PRODUCTSSuspension pin retainer (4)
TRAXXASSuspension pin retainer (4)
Motor, Titan 380 (18-turns)
TRAXXASMotor, Titan® 380 (18-turns)
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Camber link set for Bandit (gray) (plastic/ non-adjustable)
TRAXXASCamber link set for Bandit® (gray) (plastic/ non-adjustable)
CARRIER STUB AXLE Green (2)
TRAXXASCarriers, Stub Axle, Rear, Extreme Heavy Duty, Green (Left and Right)/ 3x41mm Hinge Pins (2)/ 3x20mm BCS (2) (for Use with #9080 Upgrade Kit)
Covers, gear (2)
TraxxasCovers, gear (2)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
STEERING BLOCKS RED L&R
TraxxasSteering Blocks, Extreme Heavy Duty, Red (Left and Right)/ 3x20mm BCS (2) (for Use with #9080 Upgrade Kit)
Ford Fiesta ST Rally , Ford Raptor R 4X4, Rustler 4X4, Slash 4x4 , Stampede 4x4, Rear Diff
TraxxasDifferential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) ...
View full detailsBall bearings, blue rubber sealed (5x11x4mm) (2)
TRAXXASBall bearings, blue rubber sealed (5x11x4mm) (2)
Powerhobby Hardened Steel 25T Mod1 8mm Pinion Gear MOD 1 Speed Run / Drag Racing
POWERHOBBYIncludes:1 Pinion2 Grub ScrewsFeatures:8mm BoreM5 Grub ScrewsStrong and durable Hardened Steel for long-lasting performanceTwo set-screw holes for ...
View full detailsCHARGER USB 2 CELL LIPO BAL
TRAXXASCharger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only)
CASTER BLOCKS L&R ALUM RED
TRAXXASHARDWARE KIT SLEDGE
TRAXXASHardware Kit, Sledge® (contains All Hardware Used on Sledge®)
MOTOR 2000KV BRUSHLESS
TraxxasMotor, 2000Kv 77mm, Brushless (with 6.5mm Gold-plated Connectors and High-efficiency Heatsink)
GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Pink
TRAXXASHeavy Duty X-Monster Chevrolet GMT400 CK Clear Body
TRAXXASHeavy Duty X-Monster Ford F-150 Clear Body
TRAXXASStub axle, aluminum (blue-anodized) (1) (for use only with #7750X driveshaft)
TRAXXASStub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft)
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
TRAXXASGear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ M3/12.5mm yoke pin (1)
TraxxasDriveshaft assembly (1), left or right (fully assembled, ready to install)/ M3/12.5mm yoke pin (1)
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Limit strap, rear suspension (2)/ 3x8 flat-head screw (4)
TRAXXASLimit strap, rear suspension (2)/ 3x8 flat-head screw (4)
Suspension arms, rear (left & right)
TraxxasSuspension arms, rear (left & right)
Gear cover (rear chassis brace)/ wire retainer
TRAXXASGear cover (rear chassis brace)/ wire retainer
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support)
Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support)
TRAXXASGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support)
SPUR GEAR, 50-T STEEL 1.0 MP
TRAXXASSpur Gear, 50-tooth (machined, Hardened Steel) (wide Face, 1.0 metric Pitch)
SERVO DIGITAL HIGH TORQUE METAL GEAR BB
TRAXXASHigh-Torque 347 Digital Metal Gear ServoThe ultra-high-torque 2275 digital ball bearing servo provides precise control and maximum torque in a stan...
View full detailsTrailing arm (2) (assembled with hollow balls)
TRAXXASTrailing arm (2) (assembled with hollow balls)
Suspension arm set, front (includes upper right & left and lower right & left arms)
TRAXXASSuspension arm set, front (includes upper right & left and lower right & left arms)
Springs, rear (progressive, +20% rate, blue) (2)
TRAXXASSprings, rear (progressive, +20% rate, blue) (2)
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
TRAXXASSpring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
Suspension arm set, front (includes upper right & left and lower right & left arms)
TRAXXASSuspension arm set, front (includes upper right & left and lower right & left arms)
Differential, complete (assembled) (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash)
TraxxasDifferential, complete (fits 1/10-scale 2WD Rustler®, Bandit, Stampede®, Slash®)
WHEELS WHEELIE BAR BLK
TRAXXASWheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)
ire & wheel assembled, glued (S1 compound) (SCT Split-Spoke black, satin chrome beadlock style wheel (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)Pair of ultra-soft S1-compound SCT off-road...
TRAXXASAccessory part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL EHD S...
View full detailsTires & wheels, assembled, glued (2.8') (RXT satin chrome wheels, Talon Extreme tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
TRAXXASTires & wheels, assembled, glued (2.8") (RXT satin chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front o...
View full details