(623) 251-1080
(623) 251-1080
Battery holder, 4-cell (no on/off switch) (for Jato® and others that use a male Futaba style connector)
Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw
Battery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)
Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw (fits #6723R chassis with 162mm long battery compartment)
Battery straps (225mm) (4)
Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
Battery door/ battery strap/ retainers (2)/ latch
Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)
Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post screw (for 256mm wheelbase)
Battery hold-down (1)/ hold-down retainer, front & rear (1 each)
Box, receiver & battery (2)/ cover/ foam pad & adhesive/ charge jack plug (rubber)/ 4x8mm BCS (1)/ 4x12mm BCS (2) (contains both boxes to a...
View full detailsBattery hold-down/ battery compartment spacers/ foam pads
Battery hold-down retainer, tall (2) (allows for installation of taller, multi-cell batteries)
Battery hold-down mounts, left (2)/ right (2)/ 4x15mm CCS (4)
BATTERY STRAP
Battery Hold-Down/ Mounts (front and Rear)/ Battery Compartment Spacers/ Foam Pads
Chassis (162mm Long Battery Compartment) (fits Flat Style Battery Packs) (use Only with #7430R Front Bulkhead and #6726X Battery Hold-Down)
Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4)
Battery hold-down plate (black)/ metal posts (2)/body clips (2)
Battery hold-down/ battery clip/ hold-down post/ foam spacer/ screw pin (for 288mm wheelbase)
Battery hold-down (2)/ foam pad (2)
Battery hold-downs (2)
Battery hold-down retainer (2)
Battery strap (for use with 2200mAh 2-cell and 1400mAh 3-cell LiPo batteries)
Upper chassis (long)/ battery hold down
Upper chassis/ battery hold down
Carbon fiber conversion kit (includes chassis, upper chassis, battery hold down, adhesive foam tape, hardware)
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}