TRAXXAS
CASTER BLOCKS GREEN L&R
TRAXXASCaster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replac...
View full detailsSHOCK ASSM W/O SPRINGS
TRAXXASShocks, GTM (assembled w/o springs) (2) Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Ford® Bronco® (Model# 97074-1...
View full detailsSHOCK BODY BLUE
TRAXXASBody, GTM shock, 6061-T6 aluminum (blue-anodized) (includes spring pre-load spacers) (2) Give your TRX-4M™ a custom look with these colorful GTM sh...
View full detailsXRT SHOCK TOWER FRONT L/R HALVES
TRAXXASShock tower, front (left & right halves) Left and right front shock tower halves Replacement part for these models: XRT® XRT®: TQi™ Traxxas ...
View full detailsCarriers, stub axle (rear) (left & right)
TRAXXASCarriers, stub axle (rear) (left & right) These left and right rear stub axle carriers were redesigned and beefed-up for XRT®. Standard in XRT,...
View full detailsSTEERING BLOCKS GREEN L&R
TRAXXASSteering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement left and right steering ...
View full detailsTRANSMSN CMPLT LOW RANGE
TRAXXASTransmission, complete (low range (crawl) gearing) (40.3:1 reduction ratio) (assembled with ball bearings) (includes Titan® 87T motor) Give your TR...
View full detailsBALL BEARING SET COMPLETE
TRAXXASBall bearing kit, black rubber sealed, complete (3x6x2.5mm (8), 5x8x2.5mm (4), 4x8x3mm (4), 8x12x3.5mm (2), 3.5x7x2.5mm (4)) Reduce friction and in...
View full detailsTires & wheels, assembled, glued (black 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)
TraxxasSledgehammer Extreme Terrain TiresExtreme Terrain TractionSledgehammer extreme-terrain tires provide maximum traction and control on variety of off...
View full detailsCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right
TRAXXASCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right Left and right green aluminum caster blocks improve the appearance, rug...
View full details

Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
TRAXXASUpgrade Your Traxxas Model with theTQi Telemetry Expander 2.0!Requires the TQi radio system with Wireless Module (6511), TSM receiver (6533), and A...
View full detailsPro Scale® Advanced Lighting Control System (includes power module & distribution block)
TRAXXASPro Scale® Advanced Lighting Control System Specs, videos, FAQs, and more Learn MoreTraxxas Pro Scale LightingTraxxas LED lighting sets the standar...
View full detailsBall bearings, black rubber sealed (12x21x5mm) (2)
TRAXXASBall bearings, black rubber sealed (12x21x5mm) (2) Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal ...
View full detailsSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
TRAXXASSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks impro...
View full detailsWheel washers, black (4)
TRAXXASWheel washers (4) Set of four black wheel washers Accessory part for these models: Maxx® Maxx®: TQi Traxxas Link Enabled 2.4GHz Radio & TSM ...
View full detailsLED light harness/ power harness/ zip ties (9) (fits #9311 body)
TraxxasCorvette Stingray LED Light KitExtreme Scale DetailThe Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC mod...
View full detailsSPUR GEAR 52T MACH STEEL 1.0MP
TRAXXASSpur gear, 52-tooth, machined steel (1.0 metric pitch) Accessory part for these models: Sledge® Sledge®: TQi Traxxas Link Enabled 2.4GHz Radio ...
View full detailsBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)
TRAXXASBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9) Front and rear Maxx® body mounts with ...
View full detailsBulkhead, rear (upper) (fits X-Maxx® 8s or XRT™)
TRAXXASBulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) Rear upper bulkhead fits 8s X-Maxx® and XRT® Replacement part for these models: XRT® XRT®: TQi...
View full detailsXRT Steering blocks, left & right
TRAXXASSteering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT®. Standard in XRT, they can be used to...
View full detailsDISPLAY STAND 155MM WHEELBASE
TRAXXASDisplay stand (155mm wheelbase) Put your TRX-4M™ on full display with this custom stand. The rigid foam stand holds your truck securely and prevent...
View full detailsHARDWARE KIT COMPLETE
TRAXXASHardware kit, complete (contains all hardware used on 1/18-scale TRX-4M™) (includes clear plastic storage container)Give your TRX-4M™ a complete re...
View full detailsXRT Bulkhead, Front (lower)
TRAXXASBulkhead, front (lower) Replacement XRT® front lower bulkhead Replacement part for these models: XRT® XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Ra...
View full detailsBulkhead, front (upper) XRT
TRAXXASBulkhead, front (upper) Replacement front upper bulkhead Replacement part for these models: X-Maxx® X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz ...
View full detailsBUMPER MOUNT REAR
TRAXXASBumper mount, rear Rear bumper mount Replacement part for these models: XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 78086-4)
ROLL BAR ASSM W/LIGHT BAR/MOUNTS
TRAXXASRoll bar (assembled with LED lights)/ mounts (front (2), rear (left & right))/ 2.6x12mm BCS (self-tapping) (4) (fits #9212 or 9230 series bodie...
View full detailsSUSP LINK SET COMPLETE ASSM
TRAXXASSuspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assemb...
View full detailsDRIVE CUP F/R HARDENED
TRAXXASDrive cup, front or rear (hardened steel) (for differential pinion gear)/ driveshaft boots (2)/ boot retainers (2) Pair of replacement differential...
View full detailsSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsSteering blocks, 6061-T6 aluminum (green-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (green-anodized), left & right Traxxas aluminum steering blocks combine total steering accuracy with bulletpr...
View full detailsChassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TRAXXASChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)