Filter
TRAXXAS
Shafts, idler gear (lightweight 7075-T6 aluminum hard-anodized/ PTFE-coated)
TRAXXASShafts, idler gear (lightweight 7075-T6 aluminum hard-anodized/ PTFE-coated)
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)
TRAXXASSpur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)
TRAXXASSpur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
Shoulder screws 3x10 (6) (without threadlock)
TRAXXASShoulder screws 3x10 (6) (without threadlock)
Spur gear, 38-tooth (1.0 metric pitch)
TRAXXASSpur gear, 38-tooth (1.0 metric pitch)
Shock tower, rear
TRAXXASShock tower (rear)
One-way starter bearing
TraxxasOne-way starter bearing
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)
Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)
TRAXXASShoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome) (2)
Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber link set)
TRAXXASTurnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...
View full detailsTires & wheels, assembled, glued (2.8') (All-Star black chrome wheels, paddle tires, foam inserts) (2WD electric rear) (2) (TSM rated)
TRAXXASTires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, paddle tires, foam inserts) (2WD electric rear) (2) (TSM rated)
Tires & wheels, assembled, glued (2.8') (All-Star chrome wheels, Talon tires, foam inserts) (nitro rear/ electric front) (2)
TRAXXASTires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Talon tires, foam inserts) (nitro rear/ electric front) (2)
E-clips/ C-rings
TRAXXASE-clips/ C-rings
Exhaust pipe & baffle cones
TraxxasExhaust pipe,rubber/ metal support tubes (2)/ metal fitting tube(1)
Steering blocks (l&r)
TRAXXASSteering blocks (L&R)
Suspension arms, red, front, heavy duty (2)
TRAXXASHeavy-Duty Suspension ArmsHeavy-duty suspension arms for 2WD Slash®, Stampede®, and Rustler® incorporate our latest proprietary composite material....
View full detailsSuspension arms, black, front, heavy duty (2)
TraxxasHeavy-Duty Front Suspension ArmsHeavy-duty front suspension arms for 2WD Slash®, Stampede®, and Rustler® incorporate our latest proprietary composi...
View full detailsSuspension arms, white, front, heavy duty (2)
TRAXXASSuspension arms (front) (2)
TRAXXASSuspension arms (front) (2)
Mounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)
TRAXXASMounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
TraxxasClutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Steering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Camber links, rear (TUBES green-anodized 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (...
View full detailsScrews, 3x15mm flat-head machine (hex drive) (6)
TRAXXASScrews, 3x15mm flat-head machine (hex drive) (6)
Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Wheelie bar, assembled (red) (fits Slash, Stampede®, Rustler®, Bandit series)
TRAXXASWheelie Bar, Assembled (Red) (fits Slash®, Stampede®, Rustler®, Bandit® Series)
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
TRAXXASStub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
SEAL KIT RECEIVER BOX
TRAXXASSeal kit, receiver box (includes o-ring, seals, and silicone grease)
Bumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (black)
TRAXXASBumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (black)
Shock tower (front)
TRAXXASShock tower (front)
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
TRAXXASSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks impro...
View full detailsCaster blocks, 30-degree, orange-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
TRAXXASCaster Blocks, 30-degree, Orange-Anodized 6061-T6 Aluminum (Left and Right)/ Suspension Screw Pin (2)
Skid plates, front & rear (green)
TRAXXASSkid plates, front & rear (green)
Skid plates, front & rear (blue)
TRAXXASSkid plates, front & rear (blue)
Skid plates, front & rear (pink)
TRAXXASSkid plates, front & rear (pink)