TRAXXAS

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Flywheel Nut 1/4-28 thread (for big blocks w/SG shafts)/

Linkage set, rear brake (Revo®) (Includes: brake lever/ rod (wire)/ brake spring/ brake adjustment dial/ rod guide bushing/ 2.5x5x0.75 MW)

Gear, differential output (Revo® center diff, rear with rear brake kit (5417)) This shaft is longer and allows the use of the 5417 rear brake kit. ...

Wing, Revo® (white)/ decal sheet

Wheelie bar, assembled (fits all 1/10th scale Revo® trucks)

Spring, shock (GTR) (3.5 rate green) (std. rear 90mm)

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Suspension arm set, adjustable wheelbase (lengthens wheelbase 10mm or 19mm) (suspension arm upper (2)/ suspension arm lower (2)/ bumper mount space...

Turnbuckles, toe links (5.0mm steel) (rear) (2)

Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)

Servo horns, steering and throttle (for non-Traxxa®s servos (Hitec, JR, KO, Airtronics))

Header, exhaust (tubular aluminum, silver-anodized)/ spring mount (TRX® 2.5, 2.5 R, 3.3)

Driveshaft, steel constant-velocity (shaft only, 58mm)/ drive cup pin (1) (fits front center shaft on T-Maxx®)

Spacers, steel (Jato® Twin-Spoke wheels, front) (4)

Servo saver spring, heavy duty (for use with metal-gear servos)

Insert, threaded steel (Replacement Inserts For Tubes, Part 5338R) (Includes(1) Left And (1) Right Threaded insert)

Driveshaft, steel constant-velocity, Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx (shaft only, 128.5mm)/ drive cup pin (1)

Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))

Screw pins, 4x13mm (with threadlock) (4)

Starter, recoil (complete with screws) (TRX 2.5, 2.5R, 3.3)

Linkage, steering (Revo® 3.3) (3x50mm Turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) (for use with Revo extended wheelbase chassis)

Push rod (aluminum) (assembled with rod ends) (2) (red) (use with #5359 progressive 3 rockers)

Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)

Cover plate, steering servo/ 3x8mm BCS (4)

Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3)

Bulkhead tie bars, front & rear (red-anodized aluminum)

Bolt, carburetor pinch/ 3mm locknut (TRX® 2.5, 2.5R, 3.3)

Bulkhead tie bars, front & rear (blue-anodized aluminum)

Crankshaft, multi-shaft, (for engines w/starter) (TRX® 3.3)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Screw, idle speed/ 2x1mm O-ring (1-each) (TRX® 2.5, 2.5R, 3.3)

Roll hoop, plastic/ transmission skid guard, plastic

Head, cooling (TRX® 2.5, 2.5R)

Pull string, recoil starter (TRX® 2.5, 2.5R)

Turnbuckles, toe links (5.0mm steel) (front) (2)

Wrist pin (1), Wrist Pin Clips(2) (TRX® 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)