Filter
TRAXXAS
Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
TRAXXASBattery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post screw (for 256mm wheelbase)
DRIVE CUP STEEL EXT HD FOR #7750X
TRAXXASDrive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated)
SHOCK BODY GTX MED ORANGE
TRAXXASBody, GTX shock, medium (aluminum, orange-anodized) (1)
Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))
TRAXXASRebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))
REAR BUMPER/BUMPER MOUNTS
TRAXXASBumper, Rear/ Bumper Mounts, Rear (upper and Lower) (fits Ford Raptor R)
Tires & wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires, foam inserts) (front (2), rear (extra wide) (2)) (VXL rated)
TRAXXASTires & wheels, assembled, glued (split-spoke black chrome wheels,®1.9" Response tires, foam inserts) (front (2), rear (extra wide) (2)) (VXL r...
View full detailsSuspension arm, black, lower (left, front or rear), heavy duty (1)
TRAXXASTurnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wrench (red-anodized)
TRAXXASTurnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wr...
View full detailsBALL BEARING KIT SLEDGE CMPLT
TRAXXASBall Bearing Kit, Sledge® (complete)
Pipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
TRAXXASPipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
HARDWARE KIT 4X4 CMPLT
TRAXXASHardware Kit, Hoss® 4X4 VXL/Slash® 4X4/Stampede® 4X4/Rustler® 4X4 (contains All Hardware Used on Hoss® 4X4 VXL, Slash® 4X4, Stampede® 4X4, Or Rustl...
View full detailsScrews, 4x15mm roundhead machine (6)
TRAXXASScrews, 4x15mm roundhead machine (6)
BALL BEARING KIT STAINLESS 2WD VXL CMPLT
TRAXXASBall Bearing Kit, Stainless Steel, Slash® VXL/Bandit® VXL/Stampede® VXL/Rustler® VXL (complete)
Battery hold-down (1)/ hold-down retainer, front & rear (1 each)
TRAXXASBattery hold-down (1)/ hold-down retainer, front & rear (1 each)
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)
TRAXXASPlanetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
Shocks, GTR xx-long hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
TRAXXASShocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
BODY MOUNTS F/R POSTS REAR (Ford Fiesta ST Rally)
TRAXXASBody mounts, front & rear/ body post, rear (1)
Ball bearings, black rubber sealed (15x21x4mm) (2)
TRAXXASBall bearings, black rubber sealed (15x21x4mm) (2)
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
TRAXXASRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
BULKHEAD F/R Bulkhead, front or rear
TRAXXASBulkhead, front or rear
Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
TRAXXASSkid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
Slipper pressure plate and hub (alloy)
TRAXXASSlipper pressure plate and hub (alloy)
Spur gear (72-Tooth) (32-pitch) w/bushing
TRAXXASSpur gear (72-Tooth) (32-pitch) w/bushing
Cooling fan, Velineon® VXL-3s ESC
TRAXXASCooling fan, electronic speed control, Velineon® VXL-3s or BL-2s™
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4...
View full detailsRod ends (GTR shocks) (6)
TRAXXASRod ends (GTR shocks) (6)
Ball bearing, black rubber sealed (15x24x5mm) (2)
TRAXXASBall bearing, black rubber sealed (15x24x5mm) (2)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
TRAXXASBall bearings, blue rubber sealed (10x15x4mm) (2)
Sway bar kit (front and rear) (includes sway bars and linkage)
TRAXXASSway bar kit (front and rear) (includes sway bars and linkage)
Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™)
TRAXXASBulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) Rear upper bulkhead fits 8s X-Maxx® and XRT® Replacement part for these models: XRT® XRT®: TQi...
View full detailsMotor, Titan 380 (18-turns)
TRAXXASMotor, Titan® 380 (18-turns)
Suspension arms, lower (left, front or rear) (1)
TRAXXASSuspension arms, lower (left, front or rear) (1)
Glow plug, super-duty (long-medium)/gasket
TRAXXASGlow plug, super-duty (long-medium)/gasket
Bumper, front (X-MAXX)
TRAXXASBumper, front
Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
TRAXXASSlipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
Wheelie bar, blue
TRAXXASWheelie bar, blue
SHOCK TOWER FRNT ALUM BLUE 9539
TRAXXASShock tower, front, 6061-T6 aluminum (blue-anodized)
Friction pegs, slipper (12)
TRAXXASFriction pegs, slipper (12)
Spur gear (70-Tooth) (32-Pitch) w/bushing
TRAXXASSpur gear (70-tooth) (32-Pitch) w/bushing
SHOCK CAPS GTX ALUM BLUE
TRAXXASShock caps, aluminum (blue-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge™)
Wheelie Bar, Orange
TRAXXASWheelie bar, orange (assembled)/ 3x20 CS (8)
LOWER CHASSIS BLACK 166MM BATT COMPARTMENT
TRAXXASLower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)
Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm)
TRAXXASDriveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx® trucks) (TRX® 2.5, 2.5R, 3.3)
TRAXXASAir filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx...
View full detailsSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit, Rustler®, Stampede®)
TRAXXASSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
TRAXXASTurnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Wing, Revo® (Exo-Carbon finish)/ decal sheet
TRAXXASWing, Revo® (Exo-Carbon finish)/ decal sheet
Half shaft set, long (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 assemblies)
TRAXXASHalf shaft set, long (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 as...
View full details