Filter
TRAXXAS
Bulkhead, front
TRAXXASBulkhead, front
Wheels, Weld black chrome (front) (2)
TRAXXASWheels, Weld black chrome (front) (2)
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)
TRAXXASDifferential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)
Chassis (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down)
TRAXXASChassis (162mm Long Battery Compartment) (fits Flat Style Battery Packs) (use Only with #7430R Front Bulkhead and #6726X Battery Hold-Down)
Tires & wheels, assembled, glued (Weld black chrome wheels, tires, foam inserts) (front) (2)
TRAXXASTires & wheels, assembled, glued (Weld black chrome wheels, Mickey Thompson® ET Front® tires, foam inserts) (2)
Motor/ pinion gear/ motor bushing (EZ-Start® 2)
TRAXXASMotor (hi-torque)/ pinion gear/ motor bushing (EZ-Start® 2)
WHEELIE BAR BLACK CHROME
TRAXXASWheelie bar, black chrome (assembled)/ wheelie bar mount
Skid plate, roof (body)/ 3x12mm CS (4)
TRAXXASSkid plate, roof (body)/ 3x12mm CS (4)
Housing, differential (rear)
TRAXXASHousing, differential (rear)
Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal u-joints (4)
TRAXXASHalf shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)
Data Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s electronic speed control)
TRAXXASData Link, Telemetry Expander (connects #6550X Telemetry Expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, Or #3496 Velineon® VXL...
View full detailsBumper, front/ skidplate, front (black)
TRAXXASBumper, front/ skidplate, front (black)
Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4)
TRAXXASBody washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4)
Sensor, auto-detectable, temperature
TRAXXASSensor, auto-detectable, temperature
Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)
TRAXXASRing gear, differential/ pinion gear, differential (12/47 ratio) (front)
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Wing, Rustler® 4X4 (red)/ 3x8 FCS (3)
TraxxasWing, Rustler® 4x4 (Red)/ 3x8 FCS (3)
Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (TRX 2.5, 2.5R, 3.3)
TRAXXASAir filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)
Drag link, machined 6061-T6 aluminum (orange-anodized)
TRAXXASDrag link, machined 6061-T6 aluminum (orange-anodized)
Steering blocks, 6061-T6 aluminum (blue-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (blue-anodized), left & right
Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4)...
View full detailsSprings, front (blue) (2)
TRAXXASSprings, front (blue) (2)
Axles (front) (2)
TRAXXASAxles (front) (2)
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
TRAXXASBattery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
Ball bearings, blue rubber sealed (5x8x2.5mm) (2)
TRAXXASBall bearings, blue rubber sealed (5x8x2.5mm) (2)
MAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
TRAXXASMAXX® Link cable, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
Bumper, rear/ bumper mount, rear (pink)
TRAXXASBumper, rear/ bumper mount, rear (pink)
Body, Revo® 3.3, ProGraphix® (replacement for painted body. Graphics are printed, requires paint & final color application)/decal sheet
TRAXXASBody, Revo® 3.3, ProGraphix® (replacement for painted body. Graphics are printed, requires paint & final color application)/decal sheet
Screws, 3x10mm flat-head machine (hex drive) (4)
TRAXXASScrews, 3x10mm flat-head machine (hex drive) (4)
Coupler, exhaust (silicone)
TRAXXASCoupler, exhaust (siliconee)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link set)
TRAXXASTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full detailsWheel wrench, splined, 17mm
TRAXXASWheel wrench, splined, 17mm
Lower chassis, low CG (blue)
TRAXXASLower chassis, low CG (blue)
Motor, Titan® 775 (10-turn/16.8 volts) (1)
TRAXXASMotor, Titan® 775 (10-turn/16.8 volts) (1)
Stub axle carriers (2)
TRAXXASStub axle carriers (2)
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Skidplate, chassis
TRAXXASSkidplate, chassis
Heat sink (fits #3351R and #3461 motors)
TRAXXASHeat sink (fits #3351R and #3461 motors)
Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
TRAXXASTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
TRAXXASLED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
Wheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)
TraxxasWheel hubs, splined, 17mm (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ screw pins, 4x13mm (with threadlock) (4)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
TraxxasCooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)