Filter
TRAXXAS
Bumper, rear/ bumper mount, rear (pink)
TRAXXASBumper, rear/ bumper mount, rear (pink)
Body, Revo® 3.3, ProGraphix® (replacement for painted body. Graphics are printed, requires paint & final color application)/decal sheet
TRAXXASBody, Revo® 3.3, ProGraphix® (replacement for painted body. Graphics are printed, requires paint & final color application)/decal sheet
Coupler, exhaust (silicone)
TRAXXASCoupler, exhaust (siliconee)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Tires & wheels, assembled, glued (Geode chrome wheels, paddle tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part # 5353X) (TSM rated)
TRAXXASTires & wheels, assembled, glued (Geode chrome wheels, paddle tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part # 535...
View full detailsTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link set)
TRAXXASTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full detailsWheel wrench, splined, 17mm
TRAXXASWheel wrench, splined, 17mm
Lower chassis, low CG (blue)
TRAXXASLower chassis, low CG (blue)
Stub axle carriers (2)
TRAXXASStub axle carriers (2)
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Skidplate, chassis
TRAXXASSkidplate, chassis
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
TRAXXASLED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
TraxxasCooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
Bulkhead, front 4-TEC 2.0
TRAXXASBulkhead, front
Suspension arms, long (rear)
TRAXXASSuspension arms, long (rear)
Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
TRAXXASRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
TRAXXASRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
TRAXXASReceiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease
Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASSprings, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
Suspension arms, rear (left & right)
TRAXXASSuspension arms, rear (left & right)
SHOCK SHAFT 80MM GT MAXX
TRAXXASShock shaft, 80mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
Ball bearings, black rubber sealed (5x8x2.5mm) (2)
TRAXXASBall bearings, black rubber sealed (5x8x2.5mm) (2)
Suspension pins, 44mm (2) w/ e-clips
TRAXXASSuspension pins, 44mm (2) with E-clips
Backing paint, ProGraphix®, black, acrylic (100mL)
TRAXXASBacking paint, ProGraphix®, black, acrylic (100mL)Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results.ProGraphi...
View full detailsScrew pin, 3x10mm (6)
TRAXXASScrew pin, 3x10mm (6)
Body, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
TRAXXASBody, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet
Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)
TRAXXASSuspension arms, blue, upper (left or right, front or rear), heavy duty (2)
BODY MAXX PAINTED RED
TRAXXASBody, Maxx®, red (painted, decals applied) (fits Maxx® with extended chassis (352mm wheelbase))
Screws, 4x15mm countersunk machine (hex drive) (6)
TRAXXASScrews, 4x15mm countersunk machine (hex drive) (6)
Push rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)
TRAXXASSkid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)
Stub axle, aluminum (red-anodized) (1) (for use only with #7750X driveshaft)
TRAXXASStub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)