Filter
TRAXXAS
Shock tower, rear
TRAXXASShock tower, rear
Motor mounts (front and rear)/ pins (2)
TRAXXASMotor mounts (front and rear)/ pins (2)
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)
TRAXXASWheel nuts, splined, 17mm, serrated (blue-anodized) (4)
Spring, shock, white (GTR long) (0.892 rate blue) (1 pair)
TRAXXASSpring, shock, white (GTR long) (0.892 rate blue) (1 pair)
Wire retainers, gear cover/ 3x4mm BCS (2)
TRAXXASWire retainers, gear cover/ 3x4mm BCS (2)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsTires, Canyon AT 3.8' (2)/ foam inserts (2)
TRAXXASTires, Canyon AT 3.8" (2)/ foam inserts (2)
Wheel hubs, splined, 17mm, short (4)/ wheel nuts, splined, 17mm (4) (blue-anodized)/ hub retainer M4 X 0.7 (4)/ axle pin (4)/ wrench, 5mm
TRAXXASWheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slash...
View full detailsBulkhead tie bars, front & rear, aluminum (blue-anodized)
TRAXXASBulkhead tie bars, front & rear, aluminum (blue-anodized)
Chassis, Slash 4X4
TRAXXASChassis, Slash 4X4
Body paint, ProGraphix®, Racing Green (5oz)
TRAXXASBody paint, ProGraphix®, Racing Green (5oz)Traxxas ProGraphix® Custom RC Paints deliver professional-grade, airbrush-like results with the easy app...
View full detailsHousings, differential, front
TRAXXASHousings, differential, front
Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
TRAXXASHold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
Chassis Stampede 4x4
TRAXXASChassis, Stampede® 4x4
Pro Scale® LED light set, Ford Bronco (2021), complete with power module (includes headlights, tail lights, & distribution block) (fits #9211 body)
Traxxas2021 TRX-4 Bronco Pro Scale® LED Light SetAll the lighting control of a full-scale Bronco is at your fingertips with the Pro Scale® LED Light Set f...
View full detailsBulkheads (l & r) (front) (gray)
TRAXXASBulkheads (l & r) (front) (grey)
Skid plate, roof (body) (orange)/ 3x12 CS (4)
TRAXXASSkid plate, roof (body) (orange)/ 3x12 CS (4)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
TRAXXASWheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
Suspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
TRAXXASSuspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
Body paint, ProGraphix®, metallic black (13.5oz)
TRAXXASBody paint, ProGraphix™, metallic black (13.5oz)
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
TRAXXASLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TRAXXASShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Phone mount, transmitter (fits TQi and Aton® transmitters)
TRAXXASPhone mount, transmitter (fits TQi and Aton® transmitters)
Top Fuel®, 33% nitro (quart)
TRAXXASTop Fuel®, 33% nitro (quart)
Gear adapter, fixed
TRAXXASGear adapter, fixed
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Gear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
TRAXXASSensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
Battery expansion kit (allows for installation of taller multi-cell battery packs)
TRAXXASBattery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®)
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Spur gear, 36-tooth (1.0 metric pitch)
TRAXXASSpur gear, 36-tooth (1.0 metric pitch)
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
TRAXXASShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
Wing (exocarbon)/ wing mounts (2)/ washers (2)
TRAXXASWing (exocarbon)/ wing mounts (2)/ washers (2)