Filter
TRAXXAS
RUSTLER 4X4 VXL ULTIMATE (Green)
TRAXXASGreen Rustler® 4X4 Ultimate: 1/10 Scale Brushless Stadium Truck. Ready-to-Race® with TQi™ Radio System and Traxxas Link™ Wireless Module, Velineon®...
View full details4-TEC 2.0 W/O BODY BL-2S
TRAXXASNo Body 4-Tec® 2.0 Brushless: 1/10 Scale AWD Chassis. Ready-To-Race® with TQ™ 2.4GHz radio system and BL-2s™ brushless ESC (fwd/rev). Requires 200m...
View full detailsEZ-PEAK 40W USB-C CHARGER
TRAXXASCharger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with ID® Auto Battery Identification
MOTOR MOUNT ALUM GRN (F&R)
TRAXXASMotor Mounts, 6061-T6 Aluminum (green-Anodized) (front and Rear)
MOTOR MOUNTS ALUM ORNG (F&R)
TRAXXASMotor Mounts, 6061-T6 Aluminum (orange-Anodized) (front and Rear)
Bulkhead, rear (left & right halves)/ 3x10mm BCS (4)
TRAXXASBulkhead, rear (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
Flywheel with magnet (35mm)
TRAXXASFlywheel with magnet (35mm)
Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX 2.5, 2.5R, 3.3)
TRAXXASHead screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)
Cable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASCable, T-lock (medium) (for use with TRX-4® Long Arm Lift Kit)
DRAG LINK ALUM GRN
TRAXXASDrag Link, 6061-T6 Aluminum (green-Anodized)
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
TRAXXASShim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
Shock caps, aluminum (blue-anodized), GT-Maxx® shocks (4)
TRAXXASShock Caps, Aluminum (blue-Anodized), GT-Maxx®, Shocks (4)
Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
TRAXXASBattery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post screw (for 256mm wheelbase)
T&W BLK WHL W/SLEDGEHMR AT TIRE
TRAXXASTires and Wheels, Assembled, Glued (Black Wheels, Belted Sledgehammer® All-Terrain tires, Dual Profile (2.9" Outer, 3.8" Inner), Foam Inserts) (2) ...
View full detailsDRIVE CUP STEEL EXT HD FOR #7750X
TRAXXASDrive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated)
DRIVESHAFT FRONT CV
TRAXXASDriveshafts, front, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)
SHOCK BODY GTX MED ORANGE
TRAXXASBody, GTX shock, medium (aluminum, orange-anodized) (1)
Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))
TRAXXASRebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))
DRIVELINE & SUSPENSION KIT Blue
TraxxasOuter Driveline and Suspension Upgrade Kit, Extreme Heavy Duty, Blue
REAR BUMPER/BUMPER MOUNTS
TRAXXASBumper, Rear/ Bumper Mounts, Rear (upper and Lower) (fits Ford Raptor R)
Tires & wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires, foam inserts) (front (2), rear (extra wide) (2)) (VXL rated)
TRAXXASTires & wheels, assembled, glued (split-spoke black chrome wheels,®1.9" Response tires, foam inserts) (front (2), rear (extra wide) (2)) (VXL r...
View full detailsBody, Ford GT (clear, requires painting)/ decal sheet (includes tail lights, exhaust tips, & mounting hardware)
TRAXXASBody, Ford GT® (clear, requires painting)/ decal sheet (includes tail lights, exhaust tips, & mounting hardware)
Suspension arm, black, lower (left, front or rear), heavy duty (1)
TRAXXASTurnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wrench (red-anodized)
TRAXXASTurnbuckles, aluminum (red-anodized), camber links, 58mm (4)/ front toe links, 61mm (2) (assembled with rod ends and hollow balls)/ aluminum 5mm wr...
View full detailsBALL BEARING KIT SLEDGE CMPLT
TRAXXASBall Bearing Kit, Sledge® (complete)
Body, Bigfoot® No. 1, Officially Licensed replica (painted, decals applied)
TRAXXASBody, Bigfoot® No. 1, Officially Licensed replica (painted, decals applied)
Pipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
TRAXXASPipe coupler, molded (blue)/ exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2)
HARDWARE KIT 4X4 CMPLT
TRAXXASHardware Kit, Hoss® 4X4 VXL/Slash® 4X4/Stampede® 4X4/Rustler® 4X4 (contains All Hardware Used on Hoss® 4X4 VXL, Slash® 4X4, Stampede® 4X4, Or Rustl...
View full detailsFord Fiesta ST Rally VXL,Green
TRAXXASScrews, 4x15mm roundhead machine (6)
TRAXXASScrews, 4x15mm roundhead machine (6)
BALL BEARING KIT STAINLESS 2WD VXL CMPLT
TRAXXASBall Bearing Kit, Stainless Steel, Slash® VXL/Bandit® VXL/Stampede® VXL/Rustler® VXL (complete)
Battery hold-down (1)/ hold-down retainer, front & rear (1 each)
TRAXXASBattery hold-down (1)/ hold-down retainer, front & rear (1 each)
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)
TRAXXASPlanetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
Shocks, GTR xx-long hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
TRAXXASShocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
BODY MOUNTS F/R POSTS REAR (Ford Fiesta ST Rally)
TRAXXASBody mounts, front & rear/ body post, rear (1)
Ball bearings, black rubber sealed (15x21x4mm) (2)
TRAXXASBall bearings, black rubber sealed (15x21x4mm) (2)
TRX-4 Chevrolet K10 High Trail Edition Copper
TRAXXASCOPPER TRX-4® High Trail Edition™ with 1979 Chevrolet® K10 Truck Body: 1/10 Scale 4WD Electric Truck. Ready-to-Drive® with TQi™ Traxxas Link™ Enabl...
View full detailsRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
TRAXXASRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
BULKHEAD F/R Bulkhead, front or rear
TRAXXASBulkhead, front or rear
Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
TRAXXASSkid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
Slipper pressure plate and hub (alloy)
TRAXXASSlipper pressure plate and hub (alloy)
Spur gear (72-Tooth) (32-pitch) w/bushing
TRAXXASSpur gear (72-Tooth) (32-pitch) w/bushing
Cooling fan, Velineon® VXL-3s ESC
TRAXXASCooling fan, electronic speed control, Velineon® VXL-3s or BL-2s™
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4...
View full detailsRod ends (GTR shocks) (6)
TRAXXASRod ends (GTR shocks) (6)
Ball bearing, black rubber sealed (15x24x5mm) (2)
TRAXXASBall bearing, black rubber sealed (15x24x5mm) (2)
Ball bearings, blue rubber sealed (10x15x4mm) (2)
TRAXXASBall bearings, blue rubber sealed (10x15x4mm) (2)
Sway bar kit (front and rear) (includes sway bars and linkage)
TRAXXASSway bar kit (front and rear) (includes sway bars and linkage)